نوآوری‌های صنعتی

نوآوری‌های صنعتی

مدل یکپارچه کنترل کیفیت، نگهداری-تعمیرات، موجودی با در نظر گرفتن تأخیر در انباشت بافر و بازرسی‌های متوالی در یک سیستم تولید دو ماشینه سری

نوع مقاله : مقاله پژوهشی

نویسندگان
1 گروه مهندسی صنایع، دانشکده فنی و مهندسی، دانشگاه قم، قم، ایران.
2 گروه مهندسی مکانیک، دانشگاه صنعتی اراک، اراک، ایران.
چکیده
در یک سیستم تولید سری متشکل از دو ماشین بالادستی و پایین‌دستی، برنامه‌ریزی هم‌زمان موجودی بافر و قطعات یدکی نقش مهمی در جلوگیری از توقف خط تولید هنگام انجام فعالیت‌های نگهداری و تعمیرات ماشین بالادستی ایفا می‌کند. در این راستا، آغاز انباشت بافر در زمان بهینه و با تأخیر، امکان تداوم فعالیت ماشین پایین‌دستی را از طریق استفاده از موجودی بافر در زمان تعمیر اساسی ماشین بالادستی فراهم می‌سازد. از سوی دیگر، با توجه به ماهیت ناقص فرآیندهای تولیدی در شرایط واقعی و احتمال خروج آن‌ها از وضعیت تحت کنترل در اثر بروز اختلالات، شناسایی تغییرات ماشین بالادستی از طریق بازرسی‌های متوالی ضروری است. پس از شناسایی تغییر، عملیات بازیابی با استفاده از قطعه یدکی انجام می‌شود تا ماشین مجدداً به وضعیت تحت کنترل بازگردد. بر این اساس، پژوهش حاضر با هدف کمینه‌سازی هزینه کل طی چرخه تولید، یک رویکرد یکپارچه برای تصمیم‌گیری درباره کنترل کیفیت، نگهداری و تعمیرات، موجودی بافر و قطعات یدکی در یک سیستم تولید دو ماشینه سری ارائه می‌دهد. به‌منظور ارزیابی مدل پیشنهادی، یک مثال عددی مبتنی بر صنعت خودروسازی با استفاده از نرم‌افزارMATLAB و الگوریتم فراابتکاری بهینه‌سازی ازدحام ذرات حل شده و در ادامه، از طریق مطالعه‌ای تطبیقی، تأثیر تأخیر در آغاز انباشت بافر بررسی می‌شود. نتایج نشان می‌دهند که مدل پیشنهادی در مقایسه با مدل مشابه فاقد تأخیر در شروع انباشت بافر، به‌طور متوسط هزینه کل مورد انتظار را 19/41 درصد بهبود می‌بخشد.
کلیدواژه‌ها

عنوان مقاله English

An Integrated Model of Quality Control, Maintenance and Inventory Considering Delays in Buffer Accumulation and Successive Inspections in a Two-Machine Series Production System

نویسندگان English

Shima Ghasemi 1
Fateme Rashidian 2
1 Department of Industrial Engineering, Faculty of Engineering, Qom University, Qom, Iran.
2 Department of Mechanical Engineering, Arak University of Technology, Arak, Iran.
چکیده English

In a two-machine serial production system comprising upstream and downstream machines, buffer and spare-parts inventories must be planned to prevent production interruptions during maintenance of the upstream machine. Accordingly, buffer accumulation is initiated at an optimal delayed time, allowing the downstream machine to continue operating with the accumulated inventory when an overhaul of the upstream machine becomes necessary.
In real-world manufacturing systems, process imperfections and unexpected disturbances may cause the production process to shift from an in-control to an out-of-control state. Therefore, successive inspections are conducted to detect changes in the upstream machine. Once a change is identified, a restoration action involving a spare part is implemented to return the machine to its in-control condition.
This study proposes an integrated framework for quality control, maintenance, buffer inventory, and spare-parts management in a two-machine serial production system, aiming to minimize the total cost over the production cycle. A numerical example from the automotive industry is solved using MATLAB and a particle swarm optimization (PSO) metaheuristic algorithm. Moreover, a comparative analysis is performed to examine the impact of delaying buffer accumulation. The results demonstrate that the proposed model achieves an average reduction of 19.41% in expected total cost compared with a similar model in which buffer accumulation starts without delay.

کلیدواژه‌ها English

Buffer inventory
Spare parts
Maintenance planning
Quality control
[1] Ribeiro MA, Silveira JL, Qassim RY. Joint optimization of maintenance and buffer size in a manufacturing system. European Journal of Operational Research. 2007; 176(1): 405-413. https://doi.org/10.1016/j.ejor.2005.08.007
[2] Chelbi A, Ait-Kadi D. Analysis of a production/inventory system with randomly failing production unit submitted to regular preventive maintenance. European journal of operational research. 2004; 156(3): 712-718. https://doi.org/10.1016/S0377-2217(03)00254-6
[3] Zequeira RI, Valdes JE, Berenguer C. Optimal buffer inventory and opportunistic preventive maintenance under random production capacity availability. International Journal of Production Economics. 2008; 111(2): 686-696. https://doi.org/10.1016/j.ijpe.2007.02.037
[4] Huang J, Chang Q, Arinez J. Deep Reinforcement Learning based Preventive Maintenance Policy for Serial Production Lines. Expert System Appl. 2020; 160: 113701. https://doi.org/10.1016/j.eswa.2020.113701
[5] Frazzon EM, Israel E, Albrecht A, Pereira CE, Hellingrath B. Spare parts supply chains’ operational planning using technical condition information from intelligent maintenance systems. Annual Reviews in Control. 2014; 38(1): 147-154. https://doi.org/10.1016/j.arcontrol.2014.03.014
[6] Jiang Y, Chen M, Zhou D. Joint optimization of preventive maintenance and inventory policies for multi-unit systems subject to deteriorating spare part inventory. Journal of Manufacturing Systems. 2015; 35: 191-205. https://doi.org/10.1016/j.jmsy.2015.01.002
[7] Hao S, Zheng J, Yang J. Deep reinforce learning for joint optimization of condition-based maintenance and spare ordering. Inf Sci. 2023; 634: 85-100. https://doi.org/10.1016/j.ins.2023.03.064
[8] Gan S, Zhang Z, Zhou Y, Shi J. Joint optimization of maintenance, buffer, and spare parts for a production system. Applied Mathematical Modelling. 2015; 39(19): 6032-6042. https://doi.org/10.1016/j.apm.2015.01.035
[9] Kiesmüller GP, Sachs FE. Spare parts or buffer? How to design a transfer line with unreliable machines. Eur J Oper Res. 2020; 284(1):121-134. https://doi.org/10.1016/j.ejor.2019.12.005
[10] Gan S, Zhang X, Chen L. Maintenance optimization of a production system considering defect prevention and spare parts ordering. J Risk Reliab, 2022; 235(5). https://doi.org/10.1177/1748006X211029152
[11] Giri BC, Dohi T. Inspection scheduling for imperfect production processes under free repair warranty contract. Eur J Oper Res. 2007; 183:238–252. https://doi.org/10.1016/j.ejor.2006.09.062 
[12] Hadian SM, Farughi H, Rasay H. Joint planning of maintenance, buffer stock and quality control for unreliable, imperfect manufacturing systems. Computers & Industrial Engineering. 2021; 157: 107304. https://doi.org/10.1016/j.cie.2021.107304
[13] Wang L, Lu Z, Ren Y. Joint production control and maintenance policy for a serial system with quality deterioration and stochastic demand. Reliability Engineering & System Safety. 2020; 199: 106918. https://doi.org/10.1016/j.ress.2020.106918
[14] Cheng GQ, Zhou BH, Li L. Integrated production, quality control and condition-based maintenance for imperfect production systems. Reliability Engineering & System Safety. 2018; 175: 251-264. https://doi.org/10.1016/j.ress.2018.03.025
[15] L Shi, X Lv, Y He, Z He. Optimising production, maintenance, and quality control for imperfect manufacturing systems considering timely replenishment. International Journal of Production Research. 2024; 62(10): 3504-3525. https://doi.org/10.1080/00207543.2023.2241563
[16] X Wei, Y Wang, Y He, Z Liu, Z He. Integrated production, maintenance and quality control for complex manufacturing systems considering imperfect maintenance and dynamic inspection. Reliability Engineering & System Safety. 2025; 259. https://doi.org/10.1016/j.ress.2025.110896
 [17] Tseng P. Growth behavior of a class of merit functions for the nonlinear complementarity problem. J Optim Theory Apple. 1996; 89:17-37. https://doi.org/10.1007/BF02192639

  • تاریخ دریافت 27 اردیبهشت 1405
  • تاریخ بازنگری 21 خرداد 1405
  • تاریخ پذیرش 23 خرداد 1405